Disposer, with cone assembly (size to be specified), 2-HP motor, manual reverse switch, rubber scrap ring, chrome plated vacuum breaker, solenoid with flow control & fixed nozzle, 6-1/2" inlet diameter, heat treated aluminum alloy housing, UL, CSA, CE (**Effective 6-1-17 all MRSS control panel dimensions will be 9-1/4" x 10-1/4" x 5-7/16"**)
- FOOD WASTE DISPOSER SPECIFICATIONS
- CORROSION RESISTANT BODY - Permanent molded from heat treated aluminum alloy.
- TEFLON LIP WATER SEAL - Protects the motor from damage by water.
- TAPERED ROLLER BEARING - Provides longer motor life, quiet operation and shock absorbing.
- WATER COOLED MOTOR - Provides maximum efficiency and longer life.
- QUIET OPERATION - Extra thick rubber mounting adaptor and drain outlet isolates sound and eliminates vibration.
- SPECIFICATIONS:
- MOUNTING – Rubber adaptor above grind chamber and rubber drain outlet isolates sound and eliminates vibration. No metal to metal contact.
- EXTERIOR HOUSING – Permanent molded from heat treated, corrosion resistant aluminum alloy then computer machined to a smooth polished finish. Paint free.
- SHREDDER – 8 inch diameter, machined high strength, wear resistant hardened carbide alloy.
- ROTOR – 8 inch diameter with 4 cutter bars, machined high strength, wear resistant hardened carbide alloy.
- MOTOR – 2 HP totally enclosed. Water cooled for efficiency and longer life. Built-in manual reset thermal overload protection. Available in 208 volts or 115/230 volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle, 3 phase.
- BEARINGS – Tapered roller (top) Sealed ball (bottom)
- SEAL – Teflon Lip Water Seal.
- WATER REQUIREMENT – 5 gallons of cold water per minute.
- WASTE OUTLET – Rubber drain accepts 2” piping.
- DUAL DIRECTION GRINDING – Designed to operate in either direction. Direction of rotation can be controlled when installed with automatic reversing controls.
- Reversing rotation can double cutting teeth life.
- ASSEMBLIES: (See Specification Sheet)
- CA – Cone Assembly with 12”, 15” or 18” Cone
- SA – Sink Assembly with 3-1/2” or 6-1/2” Sink Collar
- DISPOSER CONTROLS: (See Specification Sheet)
- MSS: (Non Reversing)
- MRSS: (Manual Reversing)
- ARSS-2: (Automatic Reversing)
- ARSS: (Automatic Reversing)
- Manufacturer: Salvajor
- Model: 200-CA-MRSS
- Weight: 113 lbs
view
One Year limited parts and labor warranty (USA only)